Mouse Resistor or Binding:
This device is used for blood sampling or for moving mice and for conducting behavioral and
neurological tests on mice made for one mouse in one size and for a rat in two sizes.

Built with 30 x 30 profile skeleton with electrostatic paint coating and shelf-free adjustment and
alignment bases on the lower part and outer stainless steel body
Fluid microbiology hood has the following equipment and requirements:
1-mm stainless steel 304mm-thick anti-acid coating in formable, removable and removable trays (for washing and sterilization).
2 - Overall large tub under the above trays with special slope (for ease of air passage) and
washable and sterile from stainless steel sheet 304 where one-row trays are placed.
3. Pre-filters (pre-filters) to absorb particles, before HEPA filters.
4- HEPA filters with the 99.99% absorption capacity of micro-organisms throughout the roof with sterile net lid for a sterile interchangeable hood. (122 x 61 x 15 cm)
5- In the lower and upper glass with balanced and non-stop weights in each location.
6- Has a UV lamp UV lamps to help sterilize the hood's interior secretly without contact with
personnel.
7. Radial blower and a sucker for air circulation and passage of polluted air through HEPA filters and sterilization of the hood with a power of about CFM 900.
8 - The LED light fits the cutout and slow keys for different commands.
9- Working hours to control the useful operation of the machine (obviously this clock will fail when the hood is turned off).
10- Full sealing of the hood and disconnection of the sterile part with contaminated outside space by external materials.
11. Equipped with an electronic shield for timely disconnection against power fluctuations.
12. and other requirements for an electrical outlet, indoor air circulation, and air circulation, signal lights for controlling the electrical circuits, fuses for controlling the consumable input power and other requirements. The overall dimensions of the microbiology hood are 124*70*220 cm (upper 140 and lower 80 cm).

A laboratory fume hood is a type of ventilation system that primarily functions to provide personnel protection against toxic fumes, vapors, and dust. Its secondary function includes protection against chemical spills, runaway reactions, and fires by acting as a physical barrier. Laboratory chemical hood with a height of 240, depth of 75 cm and length of 150 cm, the skeleton with profile 30 * 30 with electrostatic paint, bottom cabinet without drawer and floor, body and shelf 16mm MDF with double-sided coating. 0.9mm high-quality bone Formica, 316 matte stainless steel anti-scratch, anti-acid or granite or high-quality anti-acid ceramic with 30 mm thick anti-acid centrifugal fan. With European PVC body and blades with 1200CFM discharge power, 6mm high and low glass double wall door Floating, silent, and counterweight balance jacket in each location, with a small 316 matte stainless steel anti-scratch and anti-acid sealant with integrated argon-type welding or a small anti-acid ceramic sink. Single valve with outside control hood with relevant science, one quality gas valve with outside control hood with corresponding nozzle, one air valve with external control  hood with relevant science, equipped with electronic shield to prevent electrical oscillations, Lighting lights and switches, a number of uplifted door sockets, signal lights, PVC outlet channel score 20 with fittings A maximum of 3 meters and other equipment and accessories for full operation. Power hoods are of the European rainforest and door type and are of European quality like KOPP Germany.
Accessories: High quality simple desktop gas valve, high quality desktop compressed air valve, high quality desktop vacuum valve, high quality hood fume hood with exterior hood control, high fume hood vacuum valve with high hood exterior control, KAP or GIR power outlet German and fuse box next to the middle wall and platform with 16MP external miniature keys.

A laboratory fume hood is a type of ventilation system that primarily functions to provide personnel protection against toxic fumes, vapors, and dust. Its secondary function includes protection against chemical spills, runaway reactions, and fires by acting as a physical barrier. Laboratory chemical hood with a height of 240, depth of 75 cm and length of 150 cm, the skeleton with profile 30 * 30 with electrostatic paint, bottom cabinet without drawer and floor, body and shelf 16mm MDF with double-sided coating. 0.9mm high-quality bone Formica, 316 matte stainless steel anti-scratch, anti-acid or granite or high-quality anti-acid ceramic with 30 mm thick anti-acid centrifugal fan. With European PVC body and blades with 1200CFM discharge power, 6mm high and low glass double wall door Floating, silent, and counterweight balance jacket in each location, with a small 316 matte stainless steel anti-scratch and anti-acid sealant with integrated argon-type welding or a small anti-acid ceramic sink. Single valve with outside control hood with relevant science, one quality gas valve with outside control hood with corresponding nozzle, one air valve with external control  hood with relevant science, equipped with electronic shield to prevent electrical oscillations, Lighting lights and switches, a number of uplifted door sockets, signal lights, PVC outlet channel score 20 with fittings A maximum of 3 meters and other equipment and accessories for full operation. Power hoods are of the European rainforest and door type and are of European quality like KOPP Germany.
Accessories: High quality simple desktop gas valve, high quality desktop compressed air valve, high quality desktop vacuum valve, high quality hood fume hood with exterior hood control, high fume hood vacuum valve with high hood exterior control, KAP or GIR power outlet German and fuse box next to the middle wall and platform with 16MP external miniature keys.